Clay Bead Bracelet – Concepts

Let’s discuss clay bead bracelets—generally referred to as flat beads, too. If you’re trying to get into jewellery making, that is most likely one of many best and most cheap DIY jewellery you can begin with.

Plus, there are SO many alternative concepts for clay bead bracelets! I’m going to share tons on this publish, however you’ll be able to dream up so many extra.

Clay beads are often manufactured from polymer clay and are available in any and each colour you’ll be able to consider. Clay bead bracelets are enjoyable to make for a lot of ages, together with older youngsters.

I really purchased my 13-year-old niece the identical clay bead kit I purchased myself and we each love making jewellery from it. Additionally, remember any of those clay bead bracelet concepts could possibly be repeated or made bigger right into a necklace when you needed.

Associated: Try extra DIY equipment in our jewellery archive.

Clay Bead Bracelet Provides:

  • Clay beads
  • Elastic cord/Crystal string – I like to make use of colours however clear works effectively, too.
  • Acrylic letter beads and different accent beads or charms (some kits include these)
  • Crimping beads – for closures
  • Connectors – I exploit these on bracelets with an elastic wire so you’ll be able to pull it over your hand, so that you don’t want to lock a clasp, which may be tough one-handed.
  • Scissors – the smaller, the higher (some jewellery pliers would work for this too)
  • Jewelry pliers – for crimping beads and different jewellery making duties
  • Bead board – or a felt to cowl your work floor

There are a lot of alternative ways you’ll be able to design your clay bead bracelet with totally different equipment or clasp and closures. However these are the essential provides that I used to make the bracelets you see pictured.

The way to Make Bead Bracelets:

  • Design your bracelet. I like to put out the beads on my bead board to verify I’m pleased with my design earlier than I begin stringing the beads collectively. This fashion, I can be sure that I like the colours or I can change out the charms or different accent beads I’m utilizing in my design.
  • Lower a chunk of elastic wire twice as huge because the widest a part of your hand so you might have lots to work with.
  • Loop the underside of the wire by means of a crimping bead, then one aspect of the connector, then again by means of the identical crimping bead once more.
  • Use your pliers to crimp (smash down) the crimping bead, fastening the wire in place.
  • String your design onto the wire.
  • Verify that the bracelet is the size you design (if not, add or take off beads).
  • Add one other crimping bead to the top, loop the wire by means of the opposite aspect of the connector, after which by means of the identical crimping bead and pull tight.
  • Use your pliers once more to crimp down on the bead, fastening the wire in place.
  • When you have additional wire on both aspect, you’ll be able to snip it off and/or tuck it into the beads beside it.

Clay Bead Bracelet Concepts:

Listed here are some concepts for various sorts of designs and colour mixtures you’ll be able to strive!

  • Multicolored! You’ll be able to repeat the colours or simply add them at random.
  • Use all major colours (crimson, blue, yellow)
  • Use all secondary colours (orange, inexperienced, purple)
  • Monochromatic – use all one tone or just one colour bead for a stable look.
  • All white or black
  • Break up clusters with charms or a glass bead.
  • Add your title or a good friend’s title for gifting.
  • Add a appeal or a number of charms for a appeal bracelet look.
  • Fill a lot of the bracelet with small gold beads and use the coloured clay beads as an accent.

The place to Purchase Beads?

Beneath, I’ll hyperlink most of the particular beads and charms I’ve purchased on-line. But in addition remember the fact that you should purchase beads and jewellery making provides from many alternative locations like thrift shops, property gross sales, Etsy and eBay.

Additionally, in case you have previous jewellery that you just not put on, you may take it aside and repurpose it in your designs.

  1. My favourite basic clay bead bracelet kit (contains wire and instruments)
  2. Metal letters
  3. Fruit charms
  4. Mushroom beads
  5. Freshwater pearl beads

Steadily Requested Questions

What number of clay beads make a bracelet?

For an grownup with small to medium arms, 125-150 clay beads will make a bracelet. It’s possible you’ll want kind of or smaller or bigger sized bracelets.

What string do you employ for clay bead bracelets?

Elastic wire (generally referred to as crystal string) is finest. You should use clear or a colour. However this wire can have some stretch so you’ll be able to simply pull the bracelet on and off your hand with no need to make use of a clasp.

Are clay bead bracelets waterproof?

Polymer clay (which is often what clay beads are manufactured from) is waterproof. Nonetheless, most bracelets can have different supplies like string and charms and these could not maintain as much as soaking.

Can clay beads be washed?

Sure. Gently wash with cleaning soap and water when you get meals or grime in your bracelet. The colours won’t run or fade.

DIY clay bead bracelets are such a enjoyable challenge anybody can do. I additionally love that it’s one thing you’ll be able to work on whereas watching a film. 🙂

Associated: 15 Crafts You Can Do Whereas Watching TV


Print

get the how-to
Get the How-To

find out how to make clay bead bracelets plus a number of concepts for designs

Prepare dinner 15 minutes

Complete 15 minutes

Directions

  • Design your bracelet – I like to put out the beads on my bead board to verify I’m pleased with my design earlier than I begin stringing the beads collectively. This fashion I can be sure that I like the colours or I can change out the charms or different accent beads I’m utilizing in my design.

  • Lower a chunk of elastic wire twice as huge because the widest a part of your hand, so you might have lots to work with.

  • Loop the underside of the wire by means of a crimping bead, then one aspect of the connector, then again by means of the identical crimping bead once more.

  • Use your pliers to crimp (smash down) the crimping bead, fastening the wire in place.

  • String your design onto the wire.

  • Verify that the bracelet is the size you design (if not, add or take off beads).

  • Add one other crimping bead to the top, then loop the wire by means of the opposite aspect of the connector, then by means of the identical crimping bead and pull tight.

  • Use your pliers once more to crimp down on the bead, fastening the wire in place.

  • When you have additional wire on both aspect, you’ll be able to snip it off and/or tuck it into the beads beside it.

Notes

Design concepts to strive:

  • Multicolored! You’ll be able to repeat the colours or simply add them at random.
  • Use all major colours (crimson, blue, yellow)
  • Use all complimentary colours (orange, inexperienced, purple)
  • Monochromatic – use all one tone or just one colour bead for a stable look
  • All white or black
  • Break up clusters with charms or a glass bead
  • Add your title or a good friend’s title for gifting
  • Add a appeal or a number of charms for a appeal bracelet look
  • Fill a lot of the bracelet with small gold beads and use the coloured clay beads as an accent.